Hi everyone,
please note that Aerotech is having a recall campaign, see details below from Aerotech:
Dear AeroTech Retailer,
We have recently received reports of a very small number of case failures of the 54mm J450DM and L1000W, and the 75mm M1350W.
After investigation, we discovered that the wind angle on the fiberglass cases used in these motors is out of specification. This reduces the strength of the case and could result in an increased incidence of motor failures.
Please pull any of the above mentioned motors from your stock that have been received since January 1, 2016. Also, return the M1350W case assemblies (nozzle, case & liner) you currently have to AeroTech/RCS as soon as possible. Do not sell any of the M1350Ws until the case assemblies have been replaced.
Please contact any customers you may have sold these to and let them know so they can be replaced if not already used.
Let us know the number of these motors that you have in stock and we will send you replacements as soon as possible.
We apologize for the inconvenience, and thank you for your continued support.
André Choquette
L4, RSO, Motor testing chairman
--------------------------------------------------------------------------------------------------------------
Bonjour à tous,
veuillez prendre note que la compagnie Aérotech procède au rappel de trois modèles de moteur soient:
- 54mm J450DM and L1000W
- 75mm M1350W
Si vous avez en votre possession un de ces moteurs, vous devez communiquer avec votre détaillant Aérotech.
André Choquette
L4, RSO, directeur tests moteur
Recall on Aerotech motors
Moderators: Translation, Executive
-
- Quebec Representative
- Posts: 133
- Joined: Sat Dec 06, 2008 1:52 pm
- Location: Quebec
- Contact:
Recall on Aerotech motors
André Choquette
CAR 975 RSO, RI3, L4
Tripoli 12025 L3
CAR 975 RSO, RI3, L4
Tripoli 12025 L3